Posts Tagged 'zig zag cable chain stitch'

feathered chain stitch

Posted by on 14 Jul 2009 | Category:

This stitch, looks like the long tailed daisy done in a zig zag manner. Being a mottif stitch, it can be used comfortably for light borders and with other embelishments.

You need to be aware of the long tailed daisy stitch to be able to do this stitch. Knowledge of the zig zag chain stitch will be good.

feathered_chain_stitch_1 …. feathered_chain_stitch_2
Fig 1: We begin by doing a long tailed daisy with the start point on A. The loop is angled at about 45 degrees since we are making a zig zag pattern.
While making the ‘tail’, before going in through the fabric, we wrap the thread around the needle as shown in the illustration.

Fig 2: Then, the needle is put in through C and brought out through D, again at an angle of about 45 degrees.
Next , loop the thread around the needle as shown. This is to make the next long tailed daisy.

….
feathered_chain_stitch_3 Fig 3: Continue this procedure of making long tailed daisies at 45 degree angles.
….
feathered_chain_stitch_4
Fig 4: This illustration shows a portion of the feathered chain stitch.

zig zag cable chain stitch

Posted by on 24 May 2009 | Category:

This decorative stitch is the incorporation of zig zag chain stitch and cable chain stitch. It looks more like a cable chain stitch in zig zag pattern. It follows two parallel stitch lines.

I will be working on a slightly curved parallel stitch lines. You need to know the chain stitch and cable stitch to be able to do this stitch.  

zig_zag_cable_chain_stitch_1   zig_zag_cable_chain_stitch_2
Fig 1: With the base on one of the stitch lines, make a loop as we would in a chain stitch. Place the needle at about 90 degrees angle near the broader end of the loop and wrap the thread around as shown.   Fig 2: With the thread still wrapped, put the needle in through the other stitch line and bring it out on the first stitch line at 90 degrees angle. Loop the thread around the needle from inside out.

   
zig_zag_cable_chain_stitch_3   zig_zag_cable_chain_stitch_4
Fig 3: When you pull out the needle to tighten the loop, we would get two zig zag loops connected by a small cable.      Fig 4: Continue with this action. Always remember to keep the needle at the broader base of the previous loop.

   
zig_zag_cable_chain_stitch_5   zig_zag_cable_chain_stitch_6
Fig 5: Keep the needle at always about a 90 degrees angle to get a perfect zig zag pattern.   Fig 6: And, always loop the thread around from inside out. When your needle is directed towards left side, the loop will be from left to right and vice versa.

   
zig_zag_cable_chain_stitch_7 Fig 7: A completed zig zag cable chain pattern will show like this.